For companies seeking to reduce space in the washing machine, the rotary washer is used. As its name indicates, the parts are placed in the loading station, and by means of automatic movements by pedal or by programming, the parts-holder table rotates and goes through the different stations that have been designed in the washer: degreasing 1 (spraying), degreasing 2 (immersion), blowing, localized blowing, drying, etc. We can manufacture any size of machine for any size of part. Normally the parts, in the case of automotive, are placed in specific parts-holder racks (vehicle crankcases, covers, manifolds, gears, etc...).

We specialize in the custom manufacturing of industrial washing machines, specifically for companies in the automotive sector, which demand high productivity-performance and unbeatable washing qualities. Normally these companies require a 10 out of 10 in washing, and that the piece comes out ready for assembly. We can include the processes of degreasing-washing by spraying, immersion, spraying, blowing (general or localized) and drying. Ours are customized machines. In the tunnel or belt type, we make the machine work continuously, placing and picking up pieces without stops. We can manufacture the machine as wide and long as the customer's productivity requires. Normally the parts are supported on special frames for each type of part. We can include as many work stations as required by the customer's washing requirements: degreasing 1 (spraying), degreasing 2 (immersion), blowing (general or localized), drying, etc. Inform us about your production, and type of part, and we will make a customized machine for you.

Maintaining the quality of our products, in this model we offer a type of continuous washing machine, for small and medium-sized parts, which can be revolutionized. It is often placed after a vibratory deburring system. The parts are fed into the washer through a worm screw, entering at one end and exiting at the other end. Occasionally, we use this equipment for oiling parts or spraying corrosion inhibitors and protective products.

We are specialized in the custom manufacturing of industrial washing machines, specifically for companies in the automotive sector, which demand high productivity-performance and unbeatable washing qualities. These companies normally require the part to be washed 10 out of 10, and for it to be ready for assembly. We can include degreasing-washing processes by spraying, immersion, spraying, blowing (general or localized) and drying. Our machines are customized.
In the CABIN type, we put the pieces in mass, with a plate or a tray, and either we move the rotating plate, or we move the sprinkling ramps placed inside the cabin, or both.
Recommended for low productions and not high washing requirements.

Parts washer with pneumatic pump for manual brush washing. Suitable for any type of degreaser. Compact equipment, designed for washing small parts with brush or by filling the degreaser tank. Characteristics - Ideal for washing small parts and small spaces. - Stainless steel structure. - Blow gun. - Pneumatic pump. - Dimensions: 700 x 570 x 1.000 (h) mm. - Weight: 25kg.

Documentation

Manual parts washer, with product dosing brush and lower soaking hopper, equipped with integrated heating system for the degreasing liquid and pneumatic feed washing pump. Possibility of working with solvents or water-based soaps (to be chosen at the time of order).

Documentation

SHOT-MAXI Portable parts washer with pneumatic pump. Removable tray to be used on the floor. Hot version available for washing parts with water-based solvent (max. 40-50º). Features - Stainless steel structure. - Ideal for washing brakes and mechanical parts. - Blow gun. - Mobile trolley. - Dimensions: 950 x 600 x 1.150 (h) mm - Weight: 35kg.

Documentation

Parts washer with pneumatic pump for manual brush washing. Suitable for any type of degreaser. Equipment designed for the washing of large parts through the brush or by immersion by filling the bucket. Characteristics - Ideal for the automotive sector (trucks, heavy vehicles...) and the graphic arts sector (printers, label manufacturers...). - Blow gun. - Pneumatic pump. - Dimensions: 1200 x 800 x 1.010 (h) mm - Weight: 80kg.

Documentation

SHOT-1020 Parts washer with pneumatic pump for manual brush washing. Suitable for any type of degreaser. Equipment designed for the washing of large parts by brush or by immersion by filling the bucket. Characteristics - Ideal for the automotive sector (trucks, heavy vehicles...) and the graphic arts sector (printers, label manufacturers...). - Stainless steel structure. - Blowing gun. - Pneumatic pump. - Dimensions: 1.000 x 570 x 1.000 (h) mm - Weight: 30kg.

Documentation

SHOT-900 Parts washer with electric pump for manual brush washing. Suitable for any type of degreaser. Equipment designed for automotive and maintenance workshops. Characteristics - Ideal for the automotive and industrial sector. - Stainless steel structure. - Blow gun. - Electric pump. - Measures: 900 x 600 x 1.060 (h) mm - Weight: 40kg.

Documentation